产品名称：带线smart card connector 

产品型号：KZ-B09

详细描述：62*40*7mm

根据集成电路卡(IC卡)插座总规范,SJ/T11166-1998 设计

卡座内有簧片触点保护设计,防止非正常插卡以及铁丝等异物对簧片的损坏.

有防尘保护门,此设计获得国家zhuanli.

客户可以根据需求选择线长短，定义以及接头方式；

应用范围

水,电,气三表,读卡器,数字电视机顶盒,IC卡门锁,IC卡电话机,门禁等

Network optimization information:

The IC card holder mainly includes the electrical contact with the PCB on the card, the mechanical device for fixing and ejecting the card, the mounting base connected with the system structure, and the electrical terminal connected with the system circuit. At present, the structure of cardholders tends to be standardized.

What contact information does the cardholder have? According to the way of contact with the card, there are usually two types of card seats, namely sliding card seat and falling contact card seat.

Sliding chuck. Its main framework is thermoplastic, which is embedded with reed contacts and pins. It is connected to the circuit board by pins and mounting screws. The board can be a single chip, or the system can be inserted from the socket. When inserted in place, the reed contact contacts with the contact of the card, and the card is fixed by the elastic force of the reed contact. In addition to the conventional contacts, the smart card connector has a pair of normally closed contacts. When the card is inserted in place, the contacts are disconnected to detect whether the card is inserted in place. Pull out the card with force. In the process of inserting and removing the card, there is a sliding between the reed contact and the card. The card holder has the advantages of simple structure and low cost, and is suitable for general applications with infrequent plugging or strict cost requirements. Such as civil electricity meter, gas meter, door lock, etc. The diagram is the schematic diagram of the sliding chuck.